Price: [price_with_discount](as of [price_update_date] - Details)
[ad_1] Xbox 360 skin sticker is printed with super-high resolution graphics. It protects your devices from scratches, fading and flaking. Our patented advanced air release vinyl ensures a flawless installation. The package contains
- One (1) Xbox 360 Controller Skin (Adhesive)
- Real controller not included.
Install
1) Clean the surface of the Xbox 360 Wireless Controller as completely as possible. Use alcohol in a lint-free cloth to remove any grease or other contaminants. Most non-adhesion problems are due to some type of oil or grease present in the unit BEFORE installation.
2) Peel a piece of skin from the paper liner. DO NOT let the adhesive side touch anything.
3) Determine the placement, apply the skin to the surface using the fingers or the side of the thumb, starting from a corner and working its way through the surface
4) If a decal sticker is not straight , you can lift the adhesive gently. Do not stretch it to its original size.
5) If installed slowly and carefully, there should be no air bubbles under the skin of the adhesive. Any air that may get stuck under the adhesive coating during installation will disappear in time. You can also use a pin to break it.
6) During cold weather or to a best result apply warm air to the surface of the decal to activate the chemical agent after placing the adhesive cover on your Controller. Specially heat the surface of the edge. Allow at least 3 hours to cool before touching the decal sticker skin. Using a hair dryer or hot air gun is good
Note
Due to occasional conditions of heat, cold or moisture in the tank or during transport, some decals may lose grip and cause desquamation after application. Please contact us directly by clicking Contact Seller button on Amazon order page. We are behind our products and we guarantee a satisfactory solution
Highest quality, full color, "Anti-Slip" Grip
Precision Cut for Xbox 360 Controller
Easy installation and removal. Leaves behind sticky residue. (19459004) To install: 1. Carefully wipe the surface 2. Carefully place each piece of decal 3. Apply warm air to the surface of the decal to obtain the best result (optional)
Driver not included
[ad_2]
0 Komentar